Metrologic Instruments MS863 manual OPTIONAL IN-COUNTER MOUNTING OPTIONS FOR THE MS860

OPTIONAL IN-COUNTER MOUNTING OPTIONS FOR THE MS860

Metrologic has designed three plates to accommodate in-counter installation of the MS860. Included automatically with the purchase of the MS860 is Metrologic part #45-45471, Installation Plate. The universal and replacement plates are available for an additional charge. Contact the distributor, dealer or Metrologic customer service representative to order one of these plates.

Metrologic Part Number mlpn 45-45471, Installation Plate:

This plate is designed for use in counters with no previous cutouts. No routing is necessary for a flush fit as the stainless steel top is only .60mm (.024") thick. The cut out measurements are 180.34 mm (7.1") L x 175.26 mm (6.9”) W. The final cut out must not be greater than 1.5mm (1/16") or less than the exact measurement.

Metrologic Part Number mlpn 45-45474, Universal Plate:

This plate is designed to fit into an existing cut out up to 292.1 mm (11.5") L x 508 mm (20") W.

Metrologic Part Number mlpn 45-45470, Replacement Plate:

This plate is designed to fit into a cut out that previously contained an MS260 or MS362 scanner. This plate fits into the existing 293.62 mm (11.56") L x 245.36 mm (9.66") W.

11