CONNECTIONS OF THE “MX”NTERFACEI TO THE HOST DEVICE
Except version 17
1.Turn off the host system.
2.Connect the MCA to the host device. Connect the “MX” interface to the MCA.
3.Check the AC input requirements of the transformer to make sure the voltage matches the AC outlet. The socket outlet should be near the equipment and easily accessible.
4.Plug the transformer into the side of the MCA and the AC outlet.
5.Power up the host system.
MS6130 with Liberty® RF | Transformer | |||
Scanner Interface | ||||
(Transmitter) |
|
|
| |
|
|
| ||
“MX” Scanner Interface |
|
|
| |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
MCA
Host System
Figure 2: Connecting the “MX” (through the MCA) to a host device
To maintain compliance with applicable standards, all circuits connected to the unit must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.
4
