JVC GR-DVM5 Provided Accessories, How To Attach The Lens Cap, How To Attach The Shoulder Strap

Thread the strap through the eyelet.

	GETTING STARTED EN 11
Provided Accessories	NOTES:
	● In order to maintain optimum performance of the
	camcorder, provided cables may be equipped with
	one or more core filter. If a cable has only one core
	filter, the end that is closest to the filter should be
OR	connected to the camcorder.
	● Make sure to use the provided cables for
	connections. Do not use any other cables.

aAC Adapter AP-V17E or AP-V14E

bPower Cord (only for AP-V14E)

cBattery Pack BN-VF707U

dS/AV Cable

eUSB Cable

fCore Filter (for USB cable,
pg. 12 for attachment)

gCD-ROM

hRemote Control Unit RM-V720U

iLithium Battery CR2025* (for remote control unit)

jMemory Card 8 MB (Already inserted in the camcorder) (GR-D290 only)

kShoulder Strap (see the right column for attachment)

lLens Cap (see the right column for

attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.

Place here during shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Buckle

Strap guide

2 2

1 3

GETTING STARTED

Eyelet