22 EN VIDEO PLAYBACK

Connections To A TV Or VCR

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3. If not, go to step 4.

To AV connector

S/AV cable (provided)

Open the cover. mark

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

6 Start playback on the camcorder. ( pg. 20)

1 2 3 4

TV

VCR

A Black to S-VIDEO IN (Connect when your TV/ VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)

C Red to AUDIO R IN* D White to AUDIO L IN*

*Not required for watching still images only.

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 31, 36)

Or, press DISPLAY on the remote control to turn on/off the date indication.

●Time Code

Set “TIME CODE” to “ON” or “OFF”. ( pg. 31, 36)

●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 31, 36)

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 14)

●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

Page 22
Image 22
JVC GR-DVM5 manual EN Video Playback, If using a VCR, go to . If not, go to step