|
|
| VIDEO PLAYBACK | EN 23 |
|
|
|
| |
|
| Playback Using The Remote | The following buttons are available only when | |
|
| |||
|
| the camcorder’s Power Switch is set to “PLAY”. | ||
|
| Control | B PAUSE Button | |
|
|
| ||
|
|
| ● Pauses the tape ( pg. 24) | |
The
Installing The Battery
Up Button ( pg. 24)
C SLOW Rewind Button ( pg. 24) D REW Button
●Rewind/Reverse Shuttle Search on a tape ( pg. 21)
●Displays previous file in a memory card ( pg. 26)
Left Button ( pg. 24)
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by pushing the lock tab.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
2
1
13 
Lock tab
E INSERT Button ( pg. 46) F SHIFT Button ( pg. 24)
G DISPLAY Button ( pg. 22, 43) H SLOW Forward Button ( pg. 24) I PLAY Button
●Starts Playback of a tape ( pg. 20)
●Starts Auto Playback of images in a memory card ( pg. 27)
J FF Button
● Forward/Forward Shuttle Search on a tape |
( pg. 21) |
& PLAYBACK
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is
5 m. | Remote sensor |
NOTE:
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
Buttons And Functions
● Displays next file in a memory card ( pg. 26) |
Right Button ( pg. 24) |
K A. DUB Button ( pg. 46)
L STOP Button
●Stops the tape ( pg. 20)
●Stops Auto Playback ( pg. 27)
Down Button ( pg. 24)
M EFFECT Button ( pg. 24)
N EFFECT ON/OFF Button ( pg. 24)
The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”. o Zoom (T/W) Buttons
Zoom in/out ( pg. 19, 24)
(Also available with the Power Switch set to “PLAY”)
p START/STOP Button
Functions the same as the Recording Start/ Stop Button on the camcorder.
q S.SHOT Button
Functions the same as SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)
VIDEO RECORDING
A Infrared beam transmitting window
●Transmits the beam signal.
