JVC GR-DVM5 manual Using USB cable B Using DV cable

	EDITING EN 45
Connection To A Personal Computer	[A] Using USB cable
	It is possible to do the following things:
[A] Using USB cable [B] Using DV cable	● Transfer still images stored on a memory card
	to a PC.
OR	● Transfer still/moving images recorded on a
	tape to a PC. (GR-D290 only)
	[B] Using DV cable

To USB

USB cable (provided)

To USB connector

To DV IN/OUT

Core filter

DV cable (optional)

Core filter

To DV connector

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software (GR-D290 only), software equipped with the PC or commercially available software.

If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.

NOTES:

● Refer to “SOFTWARE INSTALLATION AND PC

CONNECTION GUIDE” for the bundled software

and drivers.

● It is recommended to use the AC Adapter as

the power supply instead of the battery pack.

(
pg. 14)

● Never connect the USB cable and the DV

cable simultaneously to the camcorder.

Connect only the cable you wish to use to the

camcorder.

● When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U DV

cable depending on the type of DV connector

(4 or 6 pins) on the PC.

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not

enter the USB mode.

● The date/time information cannot be captured into

ADVANCED FEATURES

PC PC with DV connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

●Connect the DV cable first to the PC, and then to the camcorder.

●Connect the DV cable (plugs) correctly according to the shape of the DV connector.

the PC.

● Refer to the instruction manuals of the PC and

Software.

● The still images can also be transferred to a PC

with a DV connector-equipped capture board.

● The system may not work properly depending on

the PC or capture board you are using.

“USB” and/or “ ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ ” is displayed on the LCD monitor since this can result in product damage.