173 | Metz 28 CS-2 specification

173

Image 32

Metz 28 CS-2 instruction manual 173

Contents

Mecablitz 28 CS-2 digital Contents Foreword 11.2 Meter-Feet changeover m ft 106 11.3 Safety instructions Loading and replacing the batteries Power supplyPreparations Switching the flash unit on and off Automatic switch-off function / AUTO-OFFFlash coverage and reflector attachments Mounting / Removing the flash unit Slave mode Switch on and shoot in Easy mode To terminate briefly depress the Mode key Adapting the slave flash unit Slave modes SL Slave mode without preflash suppression SL Settings on the slave flash unit Adapting the flash unit Slave mode with Preflash suppression SLAdapted slave mode SL Settings for camera and flash unit Briefly depress the Mode key to terminate Flash unit setting Cameras where operating mode, ISO and aperture can be setCamera setting Cameras where operating mode, ISO and aperture cannot be set Auto flash mode a Setting procedureFlash modes Avoid exposing the sensor to direct sunlight Manual flash mode M Metz-Remote Flash Mode SL Easy Mode Flash parameters Automatic f-stopISO speed Reflector status Flash exposure correction value EV Displays Manual partial light outputFlash readiness indication Correct exposure confirmation Maximum flash range indication Meter-Feet changeover m ft Automatic switch-off functionSpecial functions Following settings are made Re-establishing the flash unit settingsSetting procedure to adapt flash delay Troubleshooting, remedies and after-sales service ProblemForming the flash capacitor Question Unsuccessful troubleshooting Technical data Page Bouton d’essai et témoin de recyclage Manual firing button and flash-ready indicatorTasten für Wertverstellung Regleta giratoria para la cámara Vite camera e stativo Tornillo para cámara y trípode 171 172 173 Metz-Werke GmbH & Co KG Postfach 1267 D-90506 Zirndorf