Manuals / Metz / TV and Video / CRT Television

Metz 63 TF 51, 70 TF 53 manual Remote control handset RB, Nota, Menu, Batteries

Models: 63 TF 51, 70 TF 53

1 54

Download 54 pages 16.31 Kb

Page 3

Remote control handset RB 11

The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use infrared light (such as infrared headphones).

If the TV set is exposed to direct sunlight, it may sometimes not function correctly because it cannot recognise the commands transmitted by remote control.

The television must be switched on or in standby mode (ON/OFF key depressed) when it is to be operated by remote control. Always point the remote control in the direction of the TV for operation. A pilot lamp starts to flash as soon as a key on the remote control handset is pressed.

Nota:

For explanation of the video level for the remote control of video recorders, please refer to Section 16, page 52.

Do not point the remote con- trol unit into your eyes and press a key on it !

10 0 H z

RB 11

VTR

•ON - Set switches to last viewed pro- gramme

•OFF (standby setting)

Do not use rechargeable bat- teries in the remote control unit.

• Preselect with entry of two digits

• Cursor page selection in Megatext mode

1 2 3

4 5 6

7 8 9

0

• Numeric keys

• Mute

-/--

TIMER

P+

• Changing the setting

• Basic picture and sound settings

• Call Megatext

• Return from menu and

Megatext to TV picture

•Call TV menu

•Operator Help

•Function keys, depending upon programming

•IInfotext (select marks)

•Return to last programme

•Changeover from spoken to music broadcasts

•Change of format (variable zoom)

•Still picture

-

OK

+

P-

TV

MENU

?
A	REC AV
B	REC AV

INFO

PRG.

• Next programme

• Partial page selection with multiple

pages in Megatext

• Select picture function

• Megatext - select subject

• Select sound function

• Megatext - select chapter

• Call station table

• Megatext - next page

• AV recording

• Megatext - skip to next mark

• Logo display (display of time, program-

me, and sound mode

• Megatext - set or delete mark

Batteries:

Insert the enclosed batteries in the remote control, observing the symbols on the cover of the battery compartment.

Remove exhausted batteries from the remote control and return them to your dealer or to an authorised battery collection point.

3

Image 3

Metz 63 TF 51, 70 TF 53 manual Remote control handset RB, Nota, Menu, Batteries

Contents

Tiros 63 TF Hints for use of the Operating Instructions Contents Batteries Remote control handset RBNota Menu Mains voltage Setting up and connectingSetting up Connecting the aerial Language selection in the TV menu Turning the TV on and off Operator Help Call/exit Settings in the submenus can be changedTV menu and operator help TV-menu Press the P+ Programme selectionScreen displays Explanation Next programme Last programme Key Store the setting and return to TV pictureStation table Direct channel entry Station search Autostore Station settingsAutostore function Sorted to countries Exchanging two programme Store the settingsSorting stations Positions Station table Adjust fine tuning within the range of -99 to +99 with Fine tuningSelect the fine tuning function Adjust the fine tuning Any existing logo will be overwritten Allocating a station logoTV station table Call the logo menu Chrominance and sharpness are adjusted in the same manner Changing individual picture settingsChanging individual sound settings Adjusting the luminance Adjusting the contrast Call the TV menu Only if a multi-standard upgrademodule has been installed Call the „Function keys menu AssigningFunction keys Example of programming function key B Switch to Megatext mode and program the function keys Select the function for TV mode in this example „Subtitles White Settings forStore the settings Return to TV picture Yellow RGB priority Store the new settings with the OK keyVolume adaptation Activate and deactivate the volume adaptation Our example Volume adjustment and forced monoActivate forced mono sound mode Example Chrominance Switch on the noise reductionSwitch on the CTI function Correcting picture deviations Adjust the colour offset or contrast Store all settings and return to TV pictureChage the picture format Call the AV menu AV recordingAV-recording Camcorder video recorder Select the desired AV device in this example Video rec Store the settings and clear the menu Call the „Time settings menu Time settingsSwitch-on/off Reminder time Time settings Reminder time Switch-on/offHallo Reminder time can be deleted with the -/--key Childlock Switching onCall the „Childlock submenu and switch on the childlock Childlock With Key or with the ON/OFF key Switching offEnter your personal code Activate the childlock Call the „Timer recording menu Recording with the timerTimer recording Timers can be programmed up to 2 months in advance Switch off the TV speakers and adjust the headphones volume Connecting headphonesHeadphones Volume Select a chapter MegatextBasic functions Call Megatext Select a subject Page-by-page leafing Chapter-by-chapter leafingSubject-by-subject leafing Multiple pages Selection by cursorRecognizing multiple pages First page of the selected subject and chapter is displayed Direct page selectionSelect the subject Select the chapter Pages Hi TextTopical or news-flash Return to last index Return to normal font size Doubling the font size Select the next page e.g Infotext Setting marksErased when you switch to another programme position Set the first mark Set the second mark Aktuelles Megatext Infotext Mark-by-mark advance From TV picture to the first markStep forward to the next mark Mark 2 on text Key to call the page where the markErase the mark Mark 2 on text page 422/2 Automatically Riddle solutions keyAccess to riddle solutions Subtitles Variable Zoom Switch off the zoom function Operation without remote control Phono-Scart cable for VHS-Scart or S-VHS-Scart connection Camcorders Videorecorders Devices Connecting externalChange the signal type Differences between the signal types Euro 2/3 TV set Connections on the rear Video recorderVideo Rec Rec Rec.2 Me position and call Station table Store the setting and return to the TV pictureVideo signal Control Connecting a video recorder via the aerial socket Call the second picture sub- menu and adjust VCRSet the „VCR function to „On with Connecting peripheral equipment Pay-TV decoder Select video signal „via decoder Video signal is normally supplied directly from the aerialYou can switch between „Aerial direct and „Aerial via Technical data Upgrade kitsMaintenance and care Glossary Desired function key Index Subject to technical changes. Errors and omissions excepted Metz. Always first class