Metz Slim TV Press the Menu key to open the TV menu, To open, Press the F2 key to enable editing

Opening the menu	22.1 Setting Stations
	Colour standard for analogue stations

MENU

F2

The TV set will normally detect the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PAL M) automatically.

If this automatic selection does not provide satis- factory results (which should happen only rarely), you can select the colour standard manually for each programme position.

The colour standard is set in the factory to "Auto- matic".

Setting the colour standard

			• Press the "MENU" key to open the TV menu.
				• Press the white key	to open the
		0076 TF3		station table.
		0075 TF2
		0074 TF1		• Press the F2 key to enable editing of
		0073 TV France		the station table.
		0072 RTL 2	Sound corrections
				• Use the cursor control key to select
		0071 RTL	Colour standard
		0070 SAT 1	Picture quality	the programme position whose colour
		0069 Bayern 3	Picture correct.	standard you wish to change.
		0068 ZDF	Enter logo
		0067 ARD	Frequency/channel	• Press the cursor control key to
				move to the left column.
	: select
OK	:go to the
	settings
		Colour standard SECAM		• Use the corresponding numeric key
				(in the example:	) to select
				"Colour standard".

OK

EXIT

•Use the - + key to select the desired colour stan- dard, or to step through the available colour standards until the picture is displayed clearly.

•Press the "OK" key to confirm your selection.

•Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

58