Metz Slim TV manual Connecting Headphones, Sound 1, Sound, Cleaning the TV Set

Headph. Vol.

Sound mode Channel 2 Spatial

Spatial

Sound mode Channel 2 Balance

32. Connecting Headphones

The headphone socket is located behind the flap on the front of the TV set. Open the flap as descri- bed in sections 31 and 35.

We recommend the use of headphones with an impedance of at least 32 Ω. The use of headpho- nes with a lower impedance will reduce the dyna- mic range of the sound.

You can save the headphone volume as a stan- dard value.

33. Sound 1, Sound 2

When receiving a dual-language pro- gramme, you can switch between the two sound channels.

In TV mode, press and hold the yellow key until the sound function "Sound mode" is selected.

Then use the - + key to select Sound 1 or Sound 2.

34.Cleaning the TV Set

☞Before cleaning the TV set, always switch it off with the main power switch!

Clean the case of the TV set with a soft dry cloth. If necessary, you can moisten the cloth slightly. Do not use aggressive detergents or solvents, since these may damage the paintwork and the inscrip- tions. Clean the screen with a moist window leat- her.

78