Metz Slim TV manual Registering AV Devices Setting the signal types

Opening the menu

MENU

OK

25.Registering AV Devices Setting the signal types

☞This menu item is not available in a 2 ** menu.

Some AV devices may use a composite video sig- nal (FBAS) for recording and playback operations and an RGB signal for displaying their menus.

It is not possible to make a general statement in this respect. The operating instructions of the AV device concerned may provide some indication.

If you connect such an AV device with the signal type "composite video" (FBAS) and recordings are played back correctly, but you cannot see the menu of the AV device, you must change the sig- nal type in the menu "AV devices" to "RGB".

Setting the signal type

• Press the "MENU" key to open the TV menu.

	F1➔
	HiFi-Amplifier
	AV-Receiver
	Other device 2
	Other device 1
	PC
	Satellit / set top
	DVD Player 2		DataLogic
	DVD Player 1		Name
	DVD/Videorec.2		Signal types
	DVD/Videorec.1	✗	Connect
Change with –	+
Accept value with
OK	Signal IN	Signal OUT RGB

•Press the yellow key to open the menu "AV devices".

•Use the cursor control key to select the AV device whose signal type you wish to change and press the "OK" key.

• Press numeric key , use the cursor control key to select " Signal OUT", and use the - + key to change the set- ting to " RGB".

				• Press the "OK" key to confirm your
OK				selection.
	• Press the "EXIT" key to close the TV menu.
EXIT			Caution ! This may cause an existing con-
		☞
			nection diagram to be modified. If so, you
			must reconnect the AV devices accordingly.

The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

68