Palsonic PMO-585 manual Start, Cancel, Audible signals, Interrupting cooking, Touch

Models: PMO-585

1 34
Download 34 pages 27.72 Kb
Page 8
Image 8
Audible signals

8.COOK TIME. Touch this pad followed by Number pads to enter cooking times.

9.COOK POWER. Touch this pad, after the cook time has been set, followed by a Number pad to set the amount of microwave energy released to cook the food. The higher the number, the higher the power or faster the cooking speed.

10.CLOCK SET. Touch this pad followed by Number pads to enter the correct time of day.

11.Number Pads. Touch Number pads to enter cooking times, cook powers, and quantities.

12.ADD MINUTE. Touch this pad to cook for one minute at 100% cook power or to add an extra minute to your cooking cycle.

13.OFF/CANCEL. Touch this pad to erase an incorrect command or to cancel a program during cooking. This pad will not erase time of day.

14.START/ENTER. Touch Number pads to enter cooking times, cook powers, and quantities.

NOTES:

If you choose an auto cook function and change your mind, you must press OFF/ CANCEL before you choose another auto cook function.

If you attempt to enter unacceptable instructions, three tones will sound, and “Err” will appear on the display. Touch OFF/ CANCEL and re-enter the instructions. Once you choose a function, an indicator light (A programming tone will sound each time when you touch a pad. will flash as a prompt for the next action you need to perform.

If you choose a function but do not press another command pad within one minute, the dispaly returns to the time of day and you have to start over again.

If you have entered all settings for a function but do not touch the Start/Enter pad in 5 seconds, the Start? indicator light will flash.

If you open the door while the oven is on and then shut the door, the Start? indicator light will flash.

Audible signals

Audible signals are available to guide you when setting and using your oven:

A programming tone will sound each time when you touch a pad.

Four tones signal the end of a cooking cycle and two tones will sound every minute until you open the door or press the command pad.

Three tones will sound if you enter incorrect instructions.

Interrupting cooking

You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on.

To restart cooking, close the door and

TOUCH

START

If you do not want to continue cooking:

Close the door and the light goes off.

OR

Three tones will sound if you enter incorrect instructions. TOUCH

CANCEL

NOTE: Before setting a function, touch CANCEL to make sure no other function is on.

7

Page 8
Image 8
Palsonic PMO-585 manual Start, Cancel, Audible signals, A programming tone will sound each time when you touch a pad, Touch