Meyer 8118, 8124, 8120, 8122 manual Repair Parts, KEY Description

REPAIR PARTS

#19-0038 2:1 RATIO GEARBOX

Use #80-90 wt. Gear Lube Oil ONLY. DO

NOT USE GREASE FOR LUBRICANT.

KEY	PART NO.	DESCRIPTION
1	19-0034-4	Output Shaft/Gear Assembly
2	19-0018-2	Seal
3	19-0018-3	Bearing Cone
4	19-0016-3	Bearing Cup
5	19-0018-4	Retaining Ring
6	19-0034-3	Input Shaft/Gear Assembly
7	19-0043-1	Gearbox Casting (Tapped Holes)
8	19-0041-2	Gearbox Casting (Thru Holes)
9	19-0002-17	Vent Plug, 5 PSI
10	19-0023-2	Bushing, ½-14 NPT
11	19-0016-5	Plug, ½-14 NPT
12	19-0016-11	Bolt, 3/8-16 x 1.50 SHCS

NOTE: Gearbox may be flipped 180 degrees if input power rotation is opposite standard rota- tion. (Truck mount boxes only)

CAUTION: VERIFY CORRECT DRIVE ROTATION BEFORE OPERATING. FAILURE TO DO SO MAY RESULT IN SEVERE EQUIP- MENT DAMAGE.

--16-- 8100 Rear Unload