Meyer 8118, 8124, 8120, 8122 manual Specifications, Dimensions Rear Unload, Options

“SPECIFICATIONS”

Truck Mount Models	8118	8120	8122	8124
DIMENSIONS		REAR UNLOAD
Inside Length	18'	19'-4"	22'	24'8"
Inside Width	97"	97"	97"	97"
Inside Height	72.5"	72.5"	72.5"	72.5"
Overall Length	18'9"	20'1"	22'9"	25'5"
Overall Width	102"	102"	102"	102"
Overall Height - Tailgate	103"	103"	103"	103"
Overall Side, Height w/6"	90"	90"	90"	90"
Stringers
Weight	6100#	6520#	7120#	7760#
Stringer Width (Truck Mount)	33-1/2"	33-1/2"	33-1/2"	33-1/2"
Capacity (Struck level) cu. ft.	880	978	1075	1200
SPECIFICATIONS
Maximum Net Load	25 ton	25 ton	25 ton	25 ton
Roller Chain Drive - Aprons	80 - 120	80 - 120	80 - 120	80 - 120
Apron Chains (Pintle)	667XH	667XH	667XH	667XH
HP Requirements (Min.) - Truck	50 HP	50 HP	50 HP	50 HP
Rear Drive Shaft - Heavy Duty	2-1/2" Hvy Tubing	2-1/2" Hvy Tubing	2-1/2" Hvy Tubing	2-1/2" Hvy Tubing
Upright Spacing	16" on center	16" on center	16" on center	16" on center
Upright Constructions	2" x 2" Tubing	2" x 2" Tubing	2" x 2" Tubing	2" x 2" Tubing
Power Source (540 RPM)	PTO or Hyd.	PTO or Hyd.	PTO or Hyd.	PTO or Hyd.
Unloading Time (PTO)	30 sec.	30 sec.	30 sec.	30 sec.
OPTIONS
All Fiberglass Plywood Sides	STD.	STD.	STD.	STD.
All Superslick Floor	STD.	STD.	STD.	STD.
Automatic Roller Chain Tighteners	STD.	STD.	STD.	STD.
Automatic Rear Door Latching	STD.	STD.	STD.	STD.
Front Gate Viewing Window	STD.	STD.	STD.	STD.
Semi-Automatic Roller Chain Oiler	STD.	STD.	STD.	STD.
Tandem Axle Tire Fenders	STD.	STD.	STD.	STD.
Transport ag. Lights	STD.	STD.	STD.	STD.
Roll Tarp Cover	OPT.	OPT.	OPT.	OPT.
Personalized Farm Name on	STD.	STD.	STD.	STD.
Sides
Truck Mount Tie Down Kit/Factory	OPT.	OPT.	OPT.	OPT.
Mount

Manufactured by:

Meyer Mfg. Corp.

County Hwy. A West

P.O. Box 405

Dorchester, Wisconsin 54425-0405

Phone 715-654-5132 ￿ FAX 715-654-5513

1-800-325-9103

www.meyermfg.com

E-mail: sales @meyermfg.com

Farm Equipment Buyers Trust the Name Meyer!

--41-- 8100 Rear Unload