MaxTech PCI Internal Voice/FAX/Data/Speakerphone Modem Section Seven - Support and Service, Appendix A - Specifications, Appendix B

1. Make sure Call Waiting is turned off.

2. Make sure the phone line does not exhibit excess

noise.

Section Seven - Support and Service

In the unlikely event you experience difficulty in the

use of this product, we suggest you: (1) consult the

Troubleshooting section of this guide and (2) consult with

your dealer. To obtain service for this product, follow the

Return Merchandise Authorization Procedure as outlined

in the Warranty card.

Appendix A - Specifications

Communication Std. V.90, x2, V.34+ , V.34, V.32bis, V.32, V.29,

V.27ter, V.22bis, V.23, V.22, V.21, V.17,

Bell212/103

Data Compression: V.42bis/MNP5

Error Correction: V.42/MNP2-4

Host Interface: PCI

FAX Group: Group III Send/Receive Standard

FAX Command set: EIA/TIA-578 Service Class 1

Speakerphone: Full-Duplex

Transmit level: -10dBm

Receiver sensitivity:-36dBm

UART: 16550 compatible

Data format: 300-115200 bps (8N1, 7E1, 7E2, 7O1, 7O2)

Power: 0.75 W

Temperature: 0-55 degrees C (operating); -20 to 80 de-

grees C (non-operating)

Appendix B - Notices

This equipment complies with Part 68 of the FCC Rules. On this

equipment is a label that contains, among other information, the

FCC registration number and Ringer Equivalence Number (REN)

for this equipment. You must, upon request, provide this informa-

tion to your telephone company.

If your telephone equipment causes harm to the telephone

network, the Telephone Company may discontinue your service

temporarily. If possible, they will notify in advance. But, if

advance notice isn’t practical, you will be notified as soon as

possible. You will be informed of your right to file a complaint with