MaxTech PCI Internal Voice/FAX/Data/Speakerphone Modem user manual Hardware Configuration

2.4Hardware Configuration

The version of Windows 9x you have will determine which set of dialog boxes is presented to you when installingthemodeminWindows9x.Proceedtooneofthe following sections, depending on your Windows 9x's diaglog box:

•Section 2.4.1 when Windows 95 starts for the first time after card installation, it detects the modem and it displays the New Hard- ware Found dialog box

•Section 2.4.1.1 when Windows 95 starts for the first time after card installation, it detects the modem and it displays the Update Device Driver Wizard.

•Section 2.4.1.2 When Windows 98 starts for the first time after card installation, it detects the adapter and displays the Add New

Hardware Wizard.

2.4.1Windows 95 Release 4.00.950

When Windows 95 starts for the first time after card installation, it detects the modem and displays the New Hardware Found dialog box.

Under New Hardware Found, when asked to “Select which driver you want to install for your new hardware,” click on “Driver from disk provided by hard- ware manufacturer.” Click “OK.”

The Install From Disk dialog box now instructs you to “Insert the manufacturer's installation disk into the drive selected, and then click OK.” Insert the modem's driver diskette into the disk drive and type A:\ (or B:\ if inserted in drive B) in the “Copy manufacturer's files from:” box. Click “OK.”

Windows 95 may request its own installation disks or CD-ROM for some files. Insert the Windows 95 disks or CD-ROM as required. When all necessary files are copied, the modem is configured. Windows 95 will assign themodemaCOMportandIRQline. Proceed to Section 2.5.

3