4
2.4.1.2 Windows 98
When Windows 98 starts for the first time after card
installation, it detects the adapter and displays the Add
New Hardware Wizard.
Insert the disk that contains your modem drivers into
the appropriate drive and click “Next. Windows 98 will ask
you "What do you want Windows to do" Select "Search
for the best driver for your device". Click "Next". Windows
98 will find the driver on the driver disk. Click "Next".
Windows will now find a second device on the modem.
Make sure that the driver disk is still in the disk drive and
click “Next.” Windows will find the second driver. Click
“Finish” to complete the installation.
When all necessary files are copied, the modem is
configured. Windows 98 will assign the modem a COM
port and IRQ line. Proceed to Section 2.5.
2.5 Software Installation and Configuration
You are now ready to install and configure the
communication software. Refer to your software manual
for installation procedures.
We suggest the following communication param-
eters when you first use your data communication
2.4.1.1 Windows 95 Release 4.00.950 B
When Windows 95 starts for the first time after card
installation, it detects the modem and displays the Update
Device Driver Wizard. Insert the driver disk into the disk
drive and click “Next.” Windows will find the driver on the
driver disk. Click “Finish. Windows 95 may request its own
installation disks or CD for some files. Insert the Windows
95 disks or CD as required.
Windows will now find a second device on the
modem. Make sure that the driver disk is still in the disk
drive and click “Next.” Windows will find the second
driver. Click “Finish” to complete the installation.
When all necessary files are copied, the modem is
configured. Windows 95 will assign the modem a COM
port and IRQ line. Proceed to Section 2.5.