MGE UPS Systems 250A Installation, Setting up the module, Module 825 mm deep, Footprint of module

2. Installation

2.1 Setting up the module

Module 825 mm deep

≥ 400 mm

1.Install the lower base panels 23 on the sides that will not be accessible (not mandatory).

2.Position the module.

3.Level the module using the adjustable feet 24 .

4.Install the lower base panels 23 on the visible sides.

	Connection cables run under the false floor
	or in a cable trough.
	Important.
	At least 400 mm of free space is required
	above the module to ensure correct
	ventilation.
≥ 720 mm	At least 720 mm of free space is required
	in front to open the doors.

	23
	24
	23
	Rear of module
69.5	69.5
	1076
67	67
676
82	82
	Front of module

Footprint of module

Weight exerted on the floor by the four feet: ◗28 kg/cm2 (module without transformer), ◗up to 72 kg/cm2 (module with transformer).

34020201EN/AB - Page 9