Micron Technology AU8000 manual Unsteady Engine RPM or Tendency to Stop

Models: AU8000

1 25
Download 25 pages 56.16 Kb
Page 17
Image 17

15

 

UNSTEADY ENGINE RPM OR TENDENCY TO STOP

 

Fault

Remedy

9.

Loose spark plug

Tighten spark plug

10.

See points 5 - 8 above

 

11.

Ignition lead damaged or not making

Fasten or replace lead

 

contact

 

 

ENGINE IDLE UNSTEADY

 

 

Fault

Remedy

12.

Idle advance jet obstructed

Clean

13.

Idle advance screw requires adjustment

Adjust

 

ENGINE DOES NOT DEVELOP MAXIMUM POWER

 

Fault

Remedy

14.

Carburettor jet contaminated

Clean

15.

Spark plug contaminated

Clean and check gap

 

 

setting (0.4 - 0.5 mm)

16.Choke closed.

17.Filter in the fuel valve or at the carburettor inlet is dirty

18.Air filter dirty

19.Exhaust hole obstructed.

20.Air entering through gaskets of carburettor flanges, cylinder base etc

21.Wear of engine crankshaft seals

EXCESSIVE VIBRATION Fault

22.Broken blade on blower rotor

23.Debris inside blower

Move lever to position A (see starting instructions)

Clean filters

Clean

Remove exhaust and clean as far as the exhaust hole in the cylinder

Tighten screws and nuts, replace gaskets if necessary

Replace seals

Remedy

Check rotor (a quick inspection can be made by removing the rear cushion)

Open casing and clean

MICRONAIR AU8000 SPRAYER

Page 17
Image 17
Micron Technology AU8000 manual Unsteady Engine RPM or Tendency to Stop