MicroNet Technology SP3367N 3.2.2 Routers IP Address

3.2.2 Router’s IP Address

1. After the IP address setup is complete, please click <Start> then <Run> at the

bottom lower corner of the desktop.

2. Enter ‘cmd’ command and click <OK>.

3. Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by

‘Default Gateway’ (In this example, the IP address of router is 192.168.2.1, please

note that this value may be different).

Contents

Main Table of Contents Page Certifications Chapter 1 Introduction 1.1 Package Contents 1.2 Key Features y Support 802.11n Wireless Access Point 1.3 Safety Information 1.4 Specifications Page Chapter 2 Physical Description 2.1 Back Panel 2.2 Front Panel Chapter 3 System and Network Setup 3.1 Build Network Connection 3.2 Connecting to Web-Based Management 3.2.1 IP Address Configuration y WINS Configuration: Select Disable WINS Resolution. Page Page Page 3.2.2 Routers IP Address 3.2.3 Starting Web-Based Management UI Page Chapter 4 Web-Based Management UI 4.1 Quick Start Wizard Page Page 4.2 Interface Setup 4.2.1 Internet Page Page Page 4.2.2 LAN Page 4.2.3 Wireless DTIM Wireless Mode MCS 11n Settings Parameter Description Channel Bandwidth Page Page Page 4.3 Advanced Setup 4.3.1 Firewall Parameter Description Firewall SPI 4.3.2 Routing Page 4.3.3 NAT Page Page 4.3.4 ADSL 4.4 Access Management 4.4.1 ACL 4.4.2 Filter Page Page 4.4.3 SNMP 4.4.4 UPnP 4.4.5 DDNS Page 4.5 Maintenance 4.5.1 Administrator 4.5.2 Time Zone 4.5.3 Firmware Page 4.6 Status Page Chapter 5 Glossary