2.9 LED Display

While users power on this phone set, all the LED will be lighted up before the system initializing procedure finished. The function LED will be light while users press the function keys; and will be blink while users press the function keys for twice. The following definitions are for the LED:

LED

Key

Function description

LED1

 

1

Flashing for the incoming call.

LED2

 

 

Flash time : 200ms on; 200ms off

 

2

Lighting for the OFFHOOK.

K1 LED

K1

1.

Flashing for the line holding

 

 

 

 

Flash time : 500ms on; 500ms off

K2 LED

K2

 

500ms on; 1000ms off

 

 

 

2.Lighting for the line in use.

K3 LED

K3

Light up while user press this for the speed dial

 

 

K4 LED

K4

Light up while user press this for the speed dial

 

 

K5 LED

K5

Light up while user press this for the speed dial

 

 

 

 

1. Light up while user enabled forward function

K6 LED

K6

(unconditional/ No Answer/ Busy).

 

2. Light off when user diable forward function.

K7 LED

K7

1.

Light up while users enable the DND function

2.

Off while users disable the DND function

 

 

 

1.Light up while user has missed call.

K8 LED

K8

2. Light Off while users checked out the miss

 

called records

1.Light up while users have the voice mail

K9 LED

K9

2. Off while users checked out the voice mail

 

records

Press during communication to do blind transfer.

1.A communicate with B→Blind Tran. + C’s number→hear nothing (C ring) → Blind transfer

2.A communicate with B→Blind Tran. + C’s

K10 LED

K10

number→C Busy → hear special tone then

 

 

 

 

retrieve B immediately

3.A communicate with B→Blind Tran. + C’s number (not finished) →Blind Tran. Retrieve call

K11 LED

K11

1.

Light up while users enable the mute

2.

Off while users cancel the mute

 

 

 

K12 LED

K12

1.

Light up when user is using headset mode.

2.

HEADSET button works the same like

 

 

 

 

18

Page 19
Image 19
MicroNet Technology SP5101 manual LED Display, Key Function description

SP5101 specifications

MicroNet Technology SP5101 is an advanced and versatile integrated circuit designed primarily for a wide range of networking applications. It serves as a vital component for data communication, offering robust features that make it suitable for both consumer and industrial products.

One of the main features of the SP5101 is its high-speed performance, which enables efficient data transmission over various mediums. The device supports multiple communication protocols, allowing it to interface seamlessly with other network components. This flexibility enhances the device's applicability in different environments, such as smart homes, IoT systems, and enterprise-level networks.

The SP5101 is built upon cutting-edge technologies that ensure reliable operation. It incorporates advanced analog and digital circuitry, which helps maintain signal integrity even in environments with considerable electromagnetic interference. This is crucial for maintaining performance in complex networking setups where multiple devices are transmitting data simultaneously.

In terms of connectivity, the SP5101 provides multiple ports that can support different data rates, catering to various bandwidth requirements. This multi-port capability allows for simultaneous connections, which is particularly important in applications where multiple data streams need to be managed efficiently. Additionally, the chip supports both wired and wireless communications, making it a flexible choice for diverse networking scenarios.

The power efficiency of the SP5101 is another standout characteristic. Designed to minimize energy consumption, it is well-suited for battery-operated devices, which is a key consideration in modern technology development. This focus on energy efficiency contributes not only to longer device lifetimes but also to environmental sustainability initiatives aimed at reducing electronic waste.

Security features are also integrated into the SP5101, providing a layer of protection for data being transmitted across networks. This is increasingly important in today’s landscape, where cybersecurity threats are prevalent. The device’s architecture includes encryption capabilities that ensure data integrity and confidentiality during transmission.

Overall, MicroNet Technology’s SP5101 presents a comprehensive solution for networking needs, combining speed, flexibility, energy efficiency, and security. It empowers developers and engineers to create innovative networking solutions that can meet the demands of an ever-evolving technological landscape, positioning itself as an essential component for future advancements in connectivity.