36
4. Basic Function 4.1 Power on and initialization
During the initialization procedure:
1 All the LED will light on till the initialization procedure was finished.
2 All the LED will light on if there is error during the procedure.
3 On LCD will show “Initializing”.
4.2 Making Calls
There are some ways to make outgoing calls:
1 OFF HOOK Dialing
2 Redial (OFF-HOOK Dialing)
3 Pre-Dial (ON-HOOK Dialing)
4 Redial (ON-HOOK Dialing)
5 Dial during connected
6 Memory Dial
4.2.1 OFF-HOOK Dialing
The maximum digit is 16. If users enter more than 16 digits, the number will
move on the LCD displaying. User can press Speaker button, pick up handset,
or press line button to dial out. The
C
button could delete the digits.
4.2.2 Redial (OFF-HOOK Dialing)
User can press redial button during off-hook mode, phone will dial out the
latest record of the dialed list.
4.2.3 Pre-Dial
User can press the numbers while the phone is in the IDLE state then pressing
the button will change to OFF-HOOK state and dial out this number.
The
C
button could delete the digits as same as the OFF-HOOK dialing
mode.