MicroNet Technology SP5530 user manual Using the Camera, Web Configuration Utility

5

USING THE CAMERA

You can access and manage the camera through your web browser. This chapter describes the Web Configuration Utility and provides the instructions on using the camera with a web browser.

5.1. Web Configuration Utility

The camera must be configured through its built-in Web-based Configuration. Whenever you want to configure the camera, open your web browser (e.g. Internet Explorer in this manual), and type the default IP address http://192.168.1.2 in the Address bar and press [Enter]. When the login page appears, type admin in the Name and Password box, and then click Login.

NOTE:

1.Extensive knowledge of LAN will be helpful in setting up the camera.

2.The computer’s IP address must correspond with the camera’s IP address in the same segment for the two devices to communicate.

Enter the default

IP Address in the

Address bar.

Enter the default username and password.

Login Screen of Web Configuration Utility

- 12 -