password 26 bit HEX code.( Note :Currently version does not support ASIC code.)
Valid Key: Select one of the keys in the Key table to be the active key.
Key Table: Enter up to four encryption keys here.
Set Encryption to Open System/Shared Key
WEP auth method: Select Open System and Shared Key to communicate the key across the network.
WEP mode: Select 64, 128 bits.
Key Type: 64 bit support WEP password 10 bit HEX(Hexadecimal digits consist or the numbers
Valid Key: Select one of the keys in the Key table to be the active key.
Key Table: Enter up to four encryption keys here
Set Encryption to WPA-PSK
Authentication: WEP auth method select dis then select WPA and check
PSK: Enter a passphrase that will be shared by all devices using
Set Encryption to WPA-Enterprise(802.1x)
Authentication: WEP auth method select dis then select WPA and
RADIUS Server: Enter the IP address of the RADIUS server.
Authentic Port: 1812 is the port number dedicated to the authentication function of the RADIUS server.
Accounting: Enter the IP address of the RADIUS server and port number dedicated to RADIUS accounting. The RADIUS server uses accounting to keep track of user login sessions.
Radius Key: Enter the secret Key that is required of all devices to communicate with the RADIUS server.
(Note: If you change any item, click “submit” to store the value. Or click “clear”
17