To select the connection type for WAN PORT, you can choose any of the following Mode:
•For static IP, please click Static IP and type IP address, IP netmask, IP gateway.
•For dynamic IP address, please click the Dynamic IP and type Hostname
•For xDSL and using PPPoE to connect to Internet, please click PPPoE and type username and password.
•For Disable WAN Port, please click Disable.
(Note: If you change any item, click “submit” to store the value. Or click “clear” to restore previous value. To make settings working click
WAN Status Æ WAN Status
When WAN setting is Dynamic IP or PPPoE click WAN Status will show current IP status.You can click renew or release to renew or release IP at Dynamic IP setting, and click disconnect or connect to disconnect or
26
