CHAPTER 2

INSTALLATION

INSTRUCTIONS

This chapter gives step-by-step instructions for installing RAMCard.

We recommend that you read all the instructions first to acquaint yourself with the overall procedure. Then, perform each step with care exactly as described.

Opening Your Apple II

Since RAMCard is to be installed inside your Apple II, you must remove the cover of your Apple before you start.

\

CAUTION

It is dangerous to open any electrical or electronic device with the power turned on. Additionally, attempting to insert or remove peripheral cards while your Apple’s power is on will probably destroy the cards and other parts of your APple II. Be sure to turn off the power to your Apple II before performing any of the steps in this procedure.

1 . Turn off the power .

The POWER light on the lower left corner of the keyboard should not be illuminated.

9