2 . Remove the cover from your Apple II .
Pull up on the rear edge of the cover until the fasteners at the rear corners pop apart. Do this only firmly enough to separate the fas- teners, then stop. Do not pull up any further.
3 . Slide the cover backward .
Slide the cover away from the keyboard towards the rear of your Apple II. The interior of your Apple II should now be exposed.
Removing A Chip
Before you can install RAMCard, you must remove one of the RAM chips inside your Apple II. Later, you will insert the plug on the RAM- Card connector cable into the space where the chip is now.
1 . L o o k i n t o y o u r A p p l e I I . Familiarize yourself with the inside.
power supply cover | edge connector slot |
memory chip to be removed RAM chips located in this square
The Interior of an Apple II
10