Microsoft R9G-00048, S9G-00005 warranty Set uP Your ControLLer, Insert Batteries, Electrical Safety

Electrical Safety

As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock or fire or damage to the Xbox 360 console.

Select an appropriate power source for your Xbox 360 console:

•Use only the power supply unit and AC power cord that came with your console or that you received from an authorized repair center or Xbox Customer Support. If you are not sure if you have the correct power supply unit, compare the model number on the power supply unit with the model number specified on your console. If you need a replacement power supply unit or AC power cord, you can find Xbox Customer Support contact information at www.xbox.com/support.

•Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician.

•Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Use only AC power provided by a standard wall outlet.

•Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the Xbox 360 console (indicated on the power supply unit) and any other devices that are on the same circuit.

•Do not connect any other devices between the power supply unit and the Xbox 360 console or between the power cord and the power supply unit.

To avoid damaging the power cords and power supply:

•Protect the power cords from being walked on.

•Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the console.

•Do not jerk, knot, sharply bend, or otherwise abuse the power cords.

•Do not expose the power cords to sources of heat.

•Do not wrap power cords around the power supply unit.

•Keep children and pets away from the power cords. Do not allow them to bite or chew on them.

•When disconnecting the power cords, pull on the plug— do not pull on the cord.

•Do not let the power supply unit hang from either power cord.

If a power cord or power supply unit becomes damaged in any way, stop using it immediately. Visit www.xbox.com/support for Xbox Customer Support contact information.

Unplug your Xbox 360 console during lightning storms or when unused for long periods of time.

Set uP Your ControLLer

Your controller comes already wirelessly connected to your console, right out of the box.

Insert Batteries

The wireless controller uses either disposable AA or LR6 batteries (included) or the Xbox 360 Play and Charge Kit (sold separately). If you plan to use disposable batteries, you should familiarize yourself with the “Disposable Battery Safety” section that follows.

To insert batteries:

1Press the tab on the top of the AA battery pack and pull down to detach it from the controller.

2Insert two new AA (LR6) batteries with their positive (+) and negative (–) ends as shown on the underside of the battery pack. For best performance, AA rechargeable batteries are not recommended.

3Slide the AA battery pack back into place on the controller and push it in to lock.

notE

To avoid pinching your fingers when inserting, push only on the flat surface of the battery compartment cover.

4