Microstar G41M Bios Setup On-Chip IDE Controller, PCI IDE BusMaster, On-Chip Sata Controller

BIOS Setup

On-Chip IDE Controller

These items allow users to enable or disable the IDE controller.

PCI IDE BusMaster

This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives.

On-Chip SATA Controller

These items allow users to enable or disable the SATA controller.

RAID Mode

This item is used to enable/disable the RAID function for SATA devices.

I/O Device Configuration

Press <Enter> to enter the sub-menu:

COM Port 1/2

Select an address and corresponding interrupt for the first serial port.

Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options:

[Disabled]
[3BC]	Line Printer port 0
[278]	Line Printer port 2
[378]	Line Printer port 1

Parallel Port Mode

This item allows you to select the parallel port mode.

3-13