Microstar G41M Bios Setup Power Button Function, Restore On AC Power Loss, Wakeup Event Setup

Always leaves the computer in the power off state. Always leaves the computer in the power on state. Restores the system to the status before power failure or interrupt occurred.

BIOS Setup

Power Button Function

This feature sets the function of the power button. Settings are:

[On/ Off]	The power button functions as normal power off button.
[Suspend]	When you press the power button, the computer enters the
	suspend/sleep mode, but if the button is pressed for more
	than four seconds, the computer is turned off.

Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are:

[Off]

[On]

[Last State]

Wakeup Event Setup

Press <Enter> and the following sub-menu appears.

Wake Up Event By

Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS.

Resume From S3 By USB Device

The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state.

Resume From S3 By PS/2 Keyboard

This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 keyboard is detected.

Resume From S3 By PS/2 Mouse

This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse is detected.

Resume by PCI Device (PME#)

When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PME (Power Management Event).

3-15