Problem With The Projector | Microtek CX4 instruction

Image 46

Microtek CX4 Problem With The Projector, When the Power Led Indicator does not light up, The Power Indicator remains red

Contents

Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Remote Control Information Transporting Your Projector Remote Control Briefing Functions Warning： INSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Computer Connecting To A Desktop Computer 4. Connect the Control Cable to the Control port of the projector 8. Tighten all connector screws to ensure secure connections5. Remove the computer mouse cable DVI Source Connecting To A NotebookData Projector Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connecting To An Audio Source Connection of an audio cable from a computer source Connection of an audio cable from a video audio source Speaker or PA Connecting To An External SpeakerData Projector HOW TO OPERATE THIS PROJECTOR Turning The Equipment On And Off Page How To Adjust The Projected Image The Focus and Zoom Functions The Auto Key The Resize key How To Operate This Projector Functions The Buttons on the Operation Panel of the Projector & Their FunctionsButtons like The Buttons on the Remote Control & Their Functions Note The ZOOM & FOCUS functions are not suitable to this model The life of the lamp will soon end, please prepare a Examine The Projector StatusThe life of the lamp has ended, please replace with USING THE OSD MENU OSD Menu How To Access The OSD MenuHow To Change OSD Settings Brightness Position Black LevelContrast Image Information Auto ConfigurationMiscellaneous Video Input SelectSave Projection Mode VolumeKeystone Mouse Language MAINTENANCE Cleaning the Air Filter Cleaning the LensCleaning the Projector Case The Steps of Cleaning the Air Filter Replacing The Projector Lamp The Steps of Replacing a Lamp 3. Loosen the screws on the lamp case with a coin or screw driver 1. Turn the power of the projector off and unplug the power cord4. Lift up the handle and pull out the lamp 7. Tighten the lamp case you took off in step 8. Position the lamp cover you took off in step TROUBLESHOOTING When the Projector Lamp does not light up Problem With The ProjectorWhen the Power Led Indicator does not light up The Power Indicator remains red The Power Indicator is blinking red Problems With The Image Or SoundNo image appears on the screen The words ‘No Signal’ appear on the screen Abnormal Image Coloring No Sound No response with remote controlUnstable Image Displayed by VHS Video Player SPECIFICATIONS TECHNICAL Optical GeneralProjector lamp Electrical Mechanical with lens and feetEnvironmental Supported Monitor Displays Resize Display Support Modes Computer In and Monitor Connector Pin Assignments