No Sound, No response with remote control | Microtek CX4 guide

Image 49

Microtek CX4 manual No Sound, Unstable Image Displayed by VHS Video Player, No response with remote control

Contents

Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Transporting Your Projector Remote Control Information Warning： Remote Control Briefing Functions INSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Desktop Computer Connecting To A Computer 4. Connect the Control Cable to the Control port of the projector 8. Tighten all connector screws to ensure secure connections5. Remove the computer mouse cable DVI Source Connecting To A NotebookData Projector Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connection of an audio cable from a computer source Connecting To An Audio Source Connection of an audio cable from a video audio source Speaker or PA Connecting To An External SpeakerData Projector THIS PROJECTOR HOW TO OPERATE Turning The Equipment On And Off Page The Focus and Zoom Functions How To Adjust The Projected Image The Resize key The Auto Key How To Operate This Projector Buttons The Buttons on the Operation Panel of the Projector & Their FunctionsFunctions like Note The ZOOM & FOCUS functions are not suitable to this model The Buttons on the Remote Control & Their Functions The life of the lamp will soon end, please prepare a Examine The Projector StatusThe life of the lamp has ended, please replace with USING THE OSD MENU How To Change OSD Settings How To Access The OSD MenuOSD Menu Brightness Contrast Black LevelPosition Image Information Auto ConfigurationMiscellaneous Video Input SelectSave Keystone VolumeProjection Mode Mouse Language MAINTENANCE Cleaning the Projector Case Cleaning the LensCleaning the Air Filter The Steps of Cleaning the Air Filter The Steps of Replacing a Lamp Replacing The Projector Lamp 3. Loosen the screws on the lamp case with a coin or screw driver 1. Turn the power of the projector off and unplug the power cord4. Lift up the handle and pull out the lamp 8. Position the lamp cover you took off in step 7. Tighten the lamp case you took off in step TROUBLESHOOTING When the Power Led Indicator does not light up Problem With The ProjectorWhen the Projector Lamp does not light up The Power Indicator remains red The Power Indicator is blinking red Problems With The Image Or SoundNo image appears on the screen Abnormal Image Coloring The words ‘No Signal’ appear on the screen No Sound No response with remote controlUnstable Image Displayed by VHS Video Player TECHNICAL SPECIFICATIONS Optical GeneralProjector lamp Electrical Mechanical with lens and feetEnvironmental Resize Display Supported Monitor Displays Support Modes Computer In and Monitor Connector Pin Assignments