Problems With The Image Or Sound | Microtek CX4 specification

Image 47

Microtek CX4 manual Problems With The Image Or Sound, The Power Indicator is blinking red, No image appears on the screen

Contents

Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Transporting Your Projector Remote Control Information Warning： Remote Control Briefing Functions INSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Desktop Computer Connecting To A Computer 5. Remove the computer mouse cable 8. Tighten all connector screws to ensure secure connections4. Connect the Control Cable to the Control port of the projector Data Projector Connecting To A NotebookDVI Source Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connection of an audio cable from a computer source Connecting To An Audio Source Connection of an audio cable from a video audio source Data Projector Connecting To An External SpeakerSpeaker or PA THIS PROJECTOR HOW TO OPERATE Turning The Equipment On And Off Page The Focus and Zoom Functions How To Adjust The Projected Image The Resize key The Auto Key How To Operate This Projector like The Buttons on the Operation Panel of the Projector & Their FunctionsButtons Functions Note The ZOOM & FOCUS functions are not suitable to this model The Buttons on the Remote Control & Their Functions The life of the lamp has ended, please replace with Examine The Projector StatusThe life of the lamp will soon end, please prepare a USING THE OSD MENU Brightness How To Access The OSD MenuHow To Change OSD Settings OSD Menu Image Black LevelContrast Position Miscellaneous Auto ConfigurationInformation Save Input SelectVideo Mouse VolumeKeystone Projection Mode Language MAINTENANCE The Steps of Cleaning the Air Filter Cleaning the LensCleaning the Projector Case Cleaning the Air Filter The Steps of Replacing a Lamp Replacing The Projector Lamp 4. Lift up the handle and pull out the lamp 1. Turn the power of the projector off and unplug the power cord3. Loosen the screws on the lamp case with a coin or screw driver 8. Position the lamp cover you took off in step 7. Tighten the lamp case you took off in step TROUBLESHOOTING The Power Indicator remains red Problem With The ProjectorWhen the Power Led Indicator does not light up When the Projector Lamp does not light up No image appears on the screen Problems With The Image Or SoundThe Power Indicator is blinking red Abnormal Image Coloring The words ‘No Signal’ appear on the screen Unstable Image Displayed by VHS Video Player No response with remote controlNo Sound TECHNICAL SPECIFICATIONS Projector lamp GeneralOptical Environmental Mechanical with lens and feetElectrical Resize Display Supported Monitor Displays Support Modes Computer In and Monitor Connector Pin Assignments