10
DVI In
Connects to devices such as a DVD player, set top
box, or computer with a DVI interface cable.
RS232 In
For Factory use only. Do not make any connections
to this port.
VGA In
Connects to computer using a VGA cable.
Component Video (Y, Cb, Cr)/Audio (L, R)
Connects to video output from devices such as a
DVD player, set top box, or cable TV box using a
YCbCr (Component video) cable and audio cables.
Component Video (Y, Pb, Pr)/Audio (L, R)
Connects to video output from devices such as a
DVD player, set top box, or high-definition TV
(HDTV) using a YPbPr (Component video) cable and
audio cables.
Audio (L, R)
Connects to the audio output of the input source
using audio cables.
Video 1 and Video 2
Connects to the composite video outputs of devices
such as a VCR or DVD player using a Standard
composite (AV) cable.
Rear Connectors
The following illustration show the connectors on the rear side of the PDP.
S-Video 1 and S-Video 2
Connects to the S-Video output port from devices
such as a DVD player or VCR using an S-Video
cable.
Video Out
Connects to the video input of a second PDP or
monitor or to devices such as a VCR or DVD
recorder using a composite video cable.
Audio Out (L, R)
Connects to the audio input of the input source
using audio cables.
Audio In
Connects to computer audio output.
Speaker Out
Connects to auxiliary stereo speakers.
Antenna In
Connects to an antenna or a cable box with a coaxial
antenna cable.
Power Switch
This is the master power switch to turn power on or
off.
Power Connector
Connects to the power cord.