16
Viewing TV from Aerial Signals
You can receive aerial signals in two ways: 1) Receive direct aerial TV signals,
or 2) receive signals from a cable connected to a rooftop antenna. If you wish to
view direct aerial TV signals, you should set the PDP source to ANT by pushing
the ANT/CABLE button on the remote control or in the PDP Source on-screen
menu. For more information, see “Adjusting the PDP Settings,” in Chapter 5.

Connecting Cable for an Antenna or Cable TV

Connect the coaxial cable from a VHF antenna or from the cable TV provider, as shown in the following
illustration:
Connecting
Coaxial cable
Antenna
NOTE:
For optimum picture quality, you may need to adjust the direction of the rooftop antenna. Contact your
dealer for assistance if the antenna is installed incorrectly.