Middleby Marshall PS536ES installation manual back in the same way they came out

4.Replace the air fingers by pushing in at the back side. Remember to replace them according to the numbers marked on them when they were removed. They must go

back in the same way they came out.

Figure 4-17.

Extended Lip

Flange of

Finger Manifold

SECTION 4

MAINTENANCE

IMPORTANT: Only M6 Fingers fit in the bottom row. All M3 and M1 finger cover plates have extended lips at front. This extended lip will not allowthesefingerstobeinstalledinthebottomrow.

IMPORTANT: When inserting fingers the tab on the outer plate must be in the groove as shown in Figure 4-18. There is a blocking tab on the outside of the groove which will prevent inserting the finger in the groove if the outer plate is moved away from the flange of the finger manifold.

Tab on

Outer Plate

Tab on

Outer Plate

Figure 4-18.

33