Quick reference
Operation reference
1)Output Power: Press the “FUNC” key to set High or Low Power output. “LOW” icon is displayed to show that you set Low Power output. (high output has no indication)
2)Group Mode: Press the “MON” button to enable/disable GROUP MODE. “SAT” icon is displayed.
3)Squelch: Press and Hold “MON” button to enable/disable the squelch.
4)Scan: Press the “CALL” button + the 
key to enter the SCAN.
5)Scan List: Press the “CALL” button + “MON” key to change the channel in the scan list. The “•”icon will be displayed if the channel is in the scan list.
6)Priority: Press the “CALL” button + the 
key to activate the programmed priority channel. A “P” icon will be displayed.
7)Lock: Press the “FUNC” + the 
keys to lock/unlock the radio. Only “PTT” button will function when the unit is locked (VOX is disabled).
8)“VOX” Press the “FUNC” + the
keys while turning on the radio to enable/disable “VOX”. “VOX” icon will be displayed. (“PTT” button is disabled)
9)When “VOX” function is enabled, Press the “FUNC” + the
key to set HIGH or LOW “VOX” sensitivity. VOX icon blinks to show LOW sensitivity.
10)Press the “CALL” Button for about 2 seconds to send an alert with a ringer type tone to all the users in the fleet. (ringer will also be heard from the speaker when activated)
11)Press the “FUNC” + “CALL” keys to enable / disable roger beep at the end of the transmission.
12)Press “FUNC” + “MON” keys to enable/disable key beep.
,Press the “FUNC” + the
key and switch on the unit. UP will be displayed and unit enters the PROGRAMMING MODE. This operation is only allowed to authorized person.
Page. 21
