supplied belt clip.
•Headset with
Any kind of accessory for the above stated purposes can be connected to the microphone connector, provided that they meet the following requirements:
•Jack connectors for Speaker (SPK) and Microphone (MIC) must be respectively standard type 3.5 mm and 2.5 mm. and connected as follows:
MicGND
MIC
SPK
Spk GND
•The suggested speaker input impedance is 8 Ohms
•The microphone should be condenser
•All accessories should be
,Please do not connect any accessory that you are not sure meet the above stated requirements. You could cause serious damage to your radio. In if your not sure please contact your authorized dealer.
Page. 20