DC 13.8V Power cord. With in line 2 amp fuse.
HOW TO OPERATE YOUR TRANSCEIVER
You should become familiar with the controls and complete the preceding installation instructions before attempting operation of your CB.
1.Rotate the on/off volume control clockwise to turn the unit on
2.Adjust the squelch control fully
3.Adjust the volume for a normal listening level.
4.Rotate the squelch control until the noise just disappears.
5.Select the desired channel by rotating the channel selector.
6.To transmit press the PTT bar on the side of the microphone. Hold the microphone 2 to 3 inches from your lips and speak in a normal voice.
7.To receive simply release the PTT bar.
TECHNICAL SPECIFICATIONS
GENERAL
Frequency range | |
Channels | 40 |
Modulation type | AM |
Antenna impedance | 50 Ohm |
Loudspeaker | 8 Ohm |
Microphone ...............................................................................................…..Electret | |
Power Supply | 13.8 VDC negative ground |
Size
Unit Weight…………………………………………………………………….1 lb. 10 oz.
RECEIVER ( CB, |
|
Sensitivity at 10db S/N | 0.7 uV |
Selectivity | 45 dB + 10 kHz |
Squelch range | 0.5 |
Audio output power | 3.0 W @ 8 Ohm ( 10% distortion) |
Distortion at 1000 mV | 3% |
Audio frequency response | |
Intermediate frequency | I ° 10.635 MHz II ° 455 kHz |
Spurious response | .............more than 45 dB |
TRANSMITTER |
|
RF Output Power | 4.0 W |
Frequency Tolerance | 0.005% |
Harmonic Suppression | More than 60 dB |
Modulation | AM 90% ( ± 5%) |
9
