Before using for the first time
Setting the rinse aid dosage
You can adjust the rinse aid dosage for best results.
The rinse aid dosage can be set from approx.
If spots appear on crockery and glassware:
^Increase the rinse aid dosage.
If clouding or smearing appears on crockery and glassware:
^Decrease the rinse aid dosage.
^Switch the dishwasher off with the On/Off button s.
^Press the Start/Stop button in and whilst holding it in switch the dishwasher on using the On/Off button s.
Keep the Start/Stop button pressed in for at least four seconds until the "Start/Stop" indicator light comes on.
If this does not happen, start the procedure from the beginning again.
^Press the Delay start button three times.
The "Delay start" indicator will flash briefly three times at intervals.
p3 will flash in the display.
This means that the rinse aid dosage has been set at 3 ml at the factory.
The dosage set will show in the display after the p.
^Use the Start/Stop button to select the rinse aid dosage you want.
The dosage amount alters each time you press the button.
The programmed rinse aid dosage is now stored in memory.
^Switch the dishwasher off with the On/Off button s.
20