Mitsubishi Electronics FFT9905SKJHFW Macintosh Adapter AD-A205 settings, 21Multimode, 17Multimode

7.4Macintosh Adapter AD-A205 settings

The AD-A205 Macintosh Adapter allows you to take advantage of the built-in video capabilities of your Macintosh computer with the monitor.

With it, you may select any available video mode via the DIP Switches.

Using the following chart, find the computer/resolution combination you wish to configure. There are alternate settings available for most computer / resolution combinations, but we recommend you set the factory preset timing. (see 1.2 Internal Preset Memory Capability)

The chart shows all available modes for Macintosh systems plus all possible combinations with monitor. Please be aware that not all Macintosh modes are capable of driving all Macintosh video modes.

DIP Switches

Display Monitor

Macintosh

			O		AD-
					A205
1			N
	2	3
			4
MITSUBISHI				56

N

O

FF

O

In case of the computer corresponding to Multimode, you can select the resolution on your computer by setting the following switch.

Please refer to instruction book of your computer about resolution setting.

21"Multimode

1,2,6 = Set DIP switches 1,2 and 6 "ON" (Supports 640X480@67Hz; 832X624@75Hz;

1024X768@75Hz; 1152X870@75Hz) or (Supports 640X480@67Hz;

832X624@75Hz; 1024X768@75Hz; 1152X870@75Hz; 1280X1024@75Hz ) or

(Supports 640X480@67Hz; 832X624@75Hz; 1024X768@75Hz; 1152X870@75Hz; 1280X960@75Hz; 1280X1024@75Hz)

17"Multimode

1,2,5 = Set DIP switches 1,2 and 5 "ON" (Supports 640X480@67Hz; 832X624@75Hz;

1024X768@75Hz)

13"Multimode

1,2,5,6 = Set DIP switches 1,2,5 and 6 "ON" (Supports 640X480@67Hz;

832X624@75Hz)

28