Mitsubishi Electronics FFT9905SKJHFW manual User Controls, Control Names, Function

3 USER CONTROLS

3.1Control Names

See Figure 6 and 7 for the location of the following user controls and indicators.

Each control is identified by number and is described individually on page 14.

FRONT

[How to use the front control panel] Press the button marked “ ” on the control panel to open.To close, press it again.

1.POWER SWITCH

2.POWER-ON INDICATOR

4. OSD OFF BUTTON		6. FUNCTION ADJUST BUTTONS
BNC/D-SUB	OFF	ADJUST	DEGAUSS
	SELECT
3. INPUT CONNECTOR SELECT BUTTON			7. DEGAUSS BUTTON
	5. FUNCTION SELECT BUTTONS

Figure 6

3.2Function

1.POWER SWITCH: A push-on push-off switch for AC power.

2.POWER-ON INDICATOR: This indicator illuminates Green when AC power is on or Stand- by mode, and illuminates Amber when suspend or power-off mode.

3.INPUT CONNECTOR SELECT BUTTON: Push the BNC/D-SUB button to select the input signal BNC or D-SUB.

4.OSD OFF BUTTON: A push type button that is used to turn off the OSD.

5.FUNCTION SELECT BUTTONS: Push the select buttons to choose one of the functions that is superimposed on the display screen.

6.FUNCTION ADJUST BUTTONS: Push the adjust buttons to adjust the image on the screen that is selected via the function select buttons.

7.DEGAUSS BUTTON: A push type button that is used to eliminate possible color shading or impurity.

14