4 OSD(On Screen Display) FUNCTIONS
(1)CONTRAST: Adjusts to the desired contrast level.
(2)BRIGHTNESS: Adjusts to the black level of the screen.
(3)COLOR-TEMPERATURE:Adjusts the color temperature of the screen image.
(4)INFORMATION: Indicate current Scanning frequency and input Video signal port (signal connector)
(5)H-SIZE (Horizontal Size): Controls the horizontal size of the image on the screen.
(6)H-PHASE (Horizontal Position): Controls the horizontal position of the image on the screen.
(7)V-SIZE (Vertical Size): Controls the vertical size of the image on the screen.
(8)V-POSITION (Vertical Position): Controls the vertical position of the image on the screen.
(9)SIDE-BOW (Pincushion or Bow Amplitude): Straightens the left and right sides of the screen image.
(10)KEY STONE: Adjusts the parallelism of the left and right sides of the screen image.
(11)PIN-BALANCE:Adjusts the curvature of the left and right sides of the screen image.
(12)KEY-BALANCE:Adjusts the vertical slant or tilt of the screen image.
(13)H-MOIRE:Adjusts the horizontal moire level on the screen.
(14)V-MOIRE:Adjusts the vertical moire level on the screen.
(15)ROTATION: Adjusts the rotation or twist of the picture.
(16)GEOMETRY-RESET:Restore to factory preset following mode; H-SIZE, H-PHASE, V-SIZE, V-
POSI, SIDE-BOW, KEY STONE, PIN-BALANCE, KEY-BALANCE.
(17)POWER-SAVE (ON/OFF): When adjusting ON, reduces the power consumption of the monitor when not in use.
(18)VIDEO LEVEL: Selects video levels 1.0V or 0.7V.
(19)CLAMP-POSITION:Use this function to eliminate excessive green or white background that may occur when both Sync-On-Green and external sync signals are applied to the monitor.
(20)USB PORT SELECT: Control upstream connection with using optional USB unit KT-X406.
