Operation
Factory default setting
If you have altered any settings from the factory default, you can
^Switch the dishwasher off with the On/Off button s.
^Press the Start/Stop button in and whilst holding it in switch the dishwasher on using the On/Off button s.
Keep the Start/Stop button pressed in for at least four seconds until the Start/Stop indicator light comes on.
If this does not happen, start the procedure from the beginning again.
^Press the Delay start button twelve times.
The Delay start indicator light will give one long flash and two brief flashes at intervals and "p 0" or "p 1" will flash in the display.
The characters flashing in the display show whether a setting other than the factory default setting has been set.
–"p 1": All settings are set to factory default settings.
–"p 0": At least one setting has been changed.
^Press the Start/Stop button if you wish to
^Switch the dishwasher off with the On/Off button s.
37