Omega Vehicle Security CN3271 Series Type, Value R2 = Decimal Point Position, Displayed Value

r 1 =Input			Type	and	Range	Value			r2 = Decimal Point Position
0	=	TC	J	From	-100	to	1000	°C	(Available only for linear range r1 = 15 to 22)
1	=	TC	K	From	-100	to	1370	°C	_ _ _ _ .	= No decimal
2	=	TC	T	From	-200	to	400	°C	_ _ _ . _	= One decimal figure
3	=	TC	E	From	-100	to	800	°C	_ _ . _ _	= Two decimal figures
4	=	TC	N	From	-100	to	1400	°C	_ . _ _ _	= Three decimal figures
5	=	TC	S	From	-50	to	1760	°C
6	=	TC	R	From	-50	to	1760	°C
7	=	TC	B	From	0	to	1820	°C	r3 = Initial value of the readout scale
8	=	TC	L	From	-100	to	900	°C	(Available only for linear range r1 = 15 to 22)
9	=	TC	U	From	-200	to	600	°C	Range: From -1999 to 9999
10	=	TC	G	From	0	to	2300	°C
11	=	TC	D	From	0	to	2300	°C
12	=	TC	C	From	0	to	2300	°C	r4 = final value of the readout scale
13	=	TC Plat. II		From	-100	to	1400	°C	(Available only for linear range r1 = 15 to 22)
14	=	RTD Pt 100		From	-200	to	850	°C	Range: From -1999 to 9999
15	=	Linear		From	0	to	60	mV
16	=	Linear		From	12	to	60	mV
17	=	Linear		From	0	to	20	mA	r5 = Offset Adjustment
18	=	Linear		From	4	to	20	mA	Range: From -500 to 500
19	=	Linear		From	0	to	5	V	Offset value algebraically added to the measured
20	=	Linear		From	1	to	5	V	value.
21	=	Linear		From	0	to	10	V
22	=	Linear		From	2	to	10	V
23	=	TC	J	From	-150	to	1830	°F	r6 =Time constant of the filter applied to
24	=	TC	K	From	-150	to	2500	°F	the displayed	value
25	=	TC	T	From	-330	to	750	°F	Range: From 0 (filter OFF) to 8 seconds.
26	=	TC	E	From	-150	to	1470	°F	(First order filter with selected time constant.)
27	=	TC	N	From	-150	to	2550	°F
28	=	TC	S	From	-60	to	3200	°F
29	=	TC	R	From	-60	to	3200	°F	r7 = Alarm action on input fault.
30	=	TC	B	From	32	to	3300	°F	When the instrument detects an input failure
31	=	TC	L	From	-150	to	1650	°F	condition, the alarm will operate as in presence of:
32	=	TC	U	From	-330	to	1110	°F	uP = as in presence of the full scale value.
33	=	TC	G	From	0	to	4170	°F	doun = as in presence of the initial scale value.
34	=	TC	D	From	0	to	4170	°F
35	=	TC	C	From	0	to	4170	°F
36	=	TC Plat. II		From	-150	to	2550	°F	C1 = Type of limit	action
37	=	RTD Pt100		From	-330	to	1560	°F
									10

LHL-1-NEUTRO.pmd 10 19/04/2004, 15.07