Problem solving guide
Problem | Possible cause | Remedy |
Dishes, cutlery | The rinse aid amount may | Replenish the reservoir, |
and glasses are | be insufficient or the rinse | increase the dosage or |
not dry or are | aid reservoir empty. | change the brand of rinse aid. |
flecked. |
| See "Before using for the first |
|
| time". |
| Crockery was taken out of | Leave it in for longer. See |
| the cabinet too soon. | "Operation". |
| You are using "2 in 1" or | Set the Tab function (if |
| "3 in 1" tablets, which do | present) to "Normal", and |
| not have a strong enough | replenish the rinse aid. |
| drying performance. |
|
| The "2 in 1/3 in 1 Tab" | Set the Tab function (if |
| function (if present) is | present) to the detergent |
| switched on, even though | product being used (see "Tab |
| tablets are not being used. | function"). |
White residue is | Not enough rinse aid was | Increase the dosage. See |
visible on cutlery | used. | "Before using for the first time". |
and crockery, | There is no salt in the salt | Fill the salt reservoir. See |
clouding occurs | reservoir. | "Before using for the first time". |
on glassware; film |
|
|
The salt reservoir cap has | Replace it, making sure that it | |
can be wiped off. | not been screwed on | screws back on correctly. |
| ||
| correctly. |
|
| An unsuitable "2 in 1" or | Change your detergent. Use a |
| "3 in 1" tablet has been | standard liquid, tablet or |
| used. | powder detergent, and refill |
|
| the salt and rinse aid |
|
| reservoirs in the dishwasher. |
| The water softener is | Select a higher water softener |
| programmed to a setting | setting. See "Before using for |
| which is too low. | the first time". |
50