Spinning
24

Final spin speed

Programme rpm
Cottons 1400
Minimum iron 1200
Automatic plus 1200
Dark garments / Denim 1200
Express 20 1400
Shirts 600
Woollens 1200
Delicates 600
Drain / Spin 1400
Separate rinse / Starch 1400
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Tip: For programmes with a maximum
spin speed not shown on the control
panel, the nearest spin speed above it
will light up. However, to protect the
laundry the machine will only spin at
the spin speed quoted in the chart.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in‐
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot‐
tons programme, an additional rinse is
introduced.

To omit the final spin (Rinse

hold)

Press the Spin button until the
(Rinse hold) indicator light comes on.
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
immediately after the end of the pro‐
gramme.
–To start the final spin:
Use the Spin button to select the
spin speed you want. The machine
will begin the final spin.
– Press the Door button. the water will
drain away. Press the Door button
again to open the door.

To omit rinse and interim spin

and the final spin

Press the Spin button repeatedly until
the light comes on.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in. In some pro‐
grammes an additional rinse is intro‐
duced with this setting.