Installation and connection
57
Connection to the water sup‐ply
The washing machine should be con‐
nected to a mains water supply in ac‐
cordance with current local and nation‐
al safety regulations. The German au‐
thorities do not require it to have a non-
return valve as the washing machine
has been designed to comply with DIN
regulations.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than 1,000
kPa it is essential to fit a pressure re‐
ducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" threaded union. The stopcock
should be fitted by a qualified plumber.
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
Maintenance
Only use a genuine Miele hose should
you ever need a replacement or exten‐
sion. These are tested to withstand
pressure of at least 7,000 kPa.
In order to protect the water inlet
valve, the two dirt filters (one in the
open end of the inlet hose, the other
in the inlet point in the machine)
must not be removed.
Extension hose
Longer hoses 2.5 or 4.0 m in length are
available from your Miele Dealer or
Miele as optional extras.