Miele 09 900 690 A check or fault indicator light comes on but the wash programme continues as normal.

Problem solving guide
42
A check or fault indicator light comes on but the wash
programme continues as normal.
Problem Cause and remedy
The Hygiene info check
indicator light comes
on.
A programme using a temperature above 60°C has
not been run for a long time.
In order to prevent bacteria and unpleasant
odours building up in the machine, run the Cot‐
tons 90°C using powder detergent.
The Check dosage
check indicator light
comes on.
Excessive foam has built up during washing.
Use less detergent next time, and follow the man‐
ufacturer's recommended dosage amounts on the
packaging.
The Main wash or Rin‐
ses indicator lights
flash in the programme
sequence display and a
fault number appears in
the display.
The washing machine has detected a fault during the
wash programme.
Start the programme again. If the fault indicator
comes on again, call the Miele Service Depart‐
ment.
The Anti-crease/Finish
indicator light flashes in
the programme se‐
quence display.
The programme selector was moved to another posi‐
tion after the programme had started.
Turn the programme selector back to the original
position.
To switch off the fault indicator: Switch the washing machine off with the  button
and turn the programme selector to Finish.
The check indicator lights come on at the end of a programme and when the
washing machine is switched on.