Cleaning and care
If the brew unit cannot be remove or is difficult to do, the brew unit may not be in the correct position (see the "Frequently asked questions").
Do not move the brew unit handle,
this could cause the brew unit to be out of alignment and you would be unable to fully push it back into the machine.
Clean the brew unit by hand under warm water without soap.
^Wipe away any coffee from the two filters. One filter is located in the funnel a, the other is to the left of the funnel b.
^Thoroughly dry the funnel area a, to prevent coffee from sticking to it.
^Clean the inside of the coffee system. Use a vacuum to remove dry coffee grounds.
To replace the brew unit, repeat the previous steps in the reverse order:
^Push the brew unit back into the coffee system, making sure it is straight.
^Press the button on the handle of the brew unit a at the same time turn the handle to the counterclockwise b.
^Close the door. Turn the flaps 90° counterclockwise. Lower the flaps.
52
